Wall mount ring for rope

4.6/5

70 reviews

€16.90 tax incl.

Type of accessory for handrail :

For rope

26 - 28 mm

36 - 40 mm

Colour: Antique brass

In stock. Ships within 24h.

Premium wall ring designed for guiding and securing a rope along a wall. It provides an elegant, high-quality finish for staircase ropes, rope handrails or area dividers. Suitable for indoor installation on wooden and concrete walls. Warning: Do not screw into plasterboard.

Each ring is supplied with:

a grub screw to secure the rope
a fixing screw
a wall plug

How do I choose the right wall rings?

Size: Make sure you select rings that match the diameter of your rope.
Quantity: We recommend 1 ring every 80 cm. This spacing is sufficient to create a wave effect with the rope.

For rope diameter	Internal diameter - Height	Colour	Material	Use
Ø 26 - 28mm	30mm - 73mm	Silver	Nickel-plated steel	Indoor
Ø 26 - 28mm	30mm - 73mm	Antique Brass, Gold	Polished brass	Indoor
Ø 30 - 32mm	35mm - 80mm	Antique Brass, Gold	Polished brass	Indoor
Ø 36 - 40mm	40mm - 95mm	Silver	Nickel-plated steel	Indoor
Ø 36 - 40mm	40mm - 95mm	Antique Brass, Gold	Polished brass	Indoor

How do I complete my rope handrail project?

To complete your project, discover our full range of products dedicated to staircase and rope handrails.
You will find everything you need for your installation:

Ropes for handrails
Rope end fittings
Stainless steel wall rings and end fittings, suitable for outdoor installation
Our installation advice

DISCOVER OUR FULL STAIRCASE RANGE

A handrail rope can be installed in different ways depending on the desired look and the accessories you choose.

1. Select the right accessories for your project

Start by selecting end fittings and rings that are compatible with the diameter of your rope and match the style you are looking for.

For the ends of the handrail, you can choose from different types of end fittings: standard end fitting, end fitting with hook, wall-mounted end fitting, or end fitting with snap hook.
Along the staircase, wall rings guide and support the rope. We generally recommend installing 1 ring every 80 cm. This spacing creates a slight curve in the rope.
If your staircase has an angle or turn, use our rings specially designed for corners at 90°, for inside and/or outside corners.

2. Position the rope at the correct height

Position your handrail at a height that provides a natural and comfortable grip throughout the staircase. Mark the location of the different fixing points before drilling.

3. Fix the accessories to the wall

The rings and end fittings must be fixed to a strong and secure surface, such as wood or concrete. Do not fix the accessories directly to plasterboard: the fixing could pull out under pressure and would not ensure safe use of the handrail.

Our accessories are supplied with suitable fixing screws for installation.

4. Cut and secure the rope

Once the rope is positioned through the rings and inside the end fittings, tighten the grub screws. As they are tightened, they penetrate the rope and hold it firmly in position.

The end of the rope may sometimes swell slightly, making it difficult to insert into the end fitting or ring. If this happens, wrap it tightly with electrical tape before cutting it, then insert it into the end fitting. This will give you a more compact end that is easier to fit.

For a comfortable grip and an attractive finish, we generally recommend a rope with a diameter of 36 or 40 mm.

Thinner diameters, including 26, 28, 30 and 32 mm, can also be used for a more discreet appearance.

Our wall rings and finishing end caps are compatible with the following three size ranges:

26–28 mm
30–32 mm
36–40 mm

For outdoor installation, we recommend using:

Ropes that are both twisted for a comfortable grip and synthetic for resistance to moisture and UV rays. Synthetic hemp rope and polyester rope are generally preferred.
Stainless steel fixing accessories, which will not rust, unlike nickel-plated steel accessories, for example.